Configuring iSeries Navigator to use SSL

Configuring iSeries Navigator to use SSL

Configuring iSeries Navigator to use SSL:

 

 

 

Click on Secure Sockets

Click on  Download.

 

 

Password is ca400 (it is case sensitive).

 

 

C lick ok.

Click on “Use Secure Sockets Layer and click ok.

 

 

You will get a message – click ok. 

 

Close down ops nav and reopen – you should see a little lock symbol by your system name.

 

 

Then go configure your sessions (including the printer session).  Open each session and click on Communication, Configure.

 

 

By the system name, click properties.

 

 

Make sure the “Use Secured Sockets Layer” box is checked.   Click ok.  Name the session and make any changes.   Be sure to do a File, Save to save your changes.  When you start the session, look in the lower left hand corner – the lock should appear as below:

 

 

    • Related Articles

    • Adding an iSeries Access Display and Printer session

      Adding a display session to a computer   Click on Start, programs, iSeries access for windows, Start or configure session.   Click “new session”   Be sure to select “properties” to choose SSL for secure sockets layer.     Choose Workstation ID  - ...

    • Creating an iSeries connection in Navigator

      Creating an iSeries connection in Navigator, and downloading the SSL certificate Click Attachments to view document.  

    • Configure iSeries Access Printer

      Adding a iSeries Access printer session to a computer   Click on Start, programs, IBM iAccess for windws, emulator, Start or configure session.   Depending on the version of iSeries access, click “New Session” or “Configure”   Note below:  Name of ...

    • Checking Version, Release and Service Pack level of iSeries Access

      Checking Version, Release, Service Pack Level of iSeries Access for Windows Click Start, Programs, IBM iAccess for Windows or iSeries Access for Windows Click on “IBM iAccess for Windows Properties” Read the second line down on the screen that ...

    • Access for Windows Message CWBSY0002 Using Windows User Name and Password

      https://www-01.ibm.com/support/docview.wss?uid=nas8N1016498  The Access for Windows connection fails with the following message: CWBSY0002 - The password is not correct for the specified user ID. This occurs when the Use Windows user name and ...